How to send @ or % in Morse Code

08:26 Fernando Luiz de Souza 0 Comments

Many of those proficient in Morse might be stumped when it comes to sending @ or %, fortunately the ITU-R recommendation on International Morse Code provides an answer.
The ITU Radiocommunication Sector (ITU-R) is one of the three sectors (divisions or units) of the International Telecommunication Union (ITU) and is responsible for radio communication.

Recommendation ITU-R M.1677-1 (10/2009) confirms the International Morse code characters and the operational provisions applying to their use in radiocommunication services.

The Morse code for @ is .– – .– .

For the percentage sign % there is no corresponding signal in the Morse code and they recommend that the figure 0, the fraction bar and the figure 0 shall be transmitted successively.

A whole number, a fractional number, or a fraction, followed by a % sign, shall be transmitted by joining up the whole number, the fraction number, or the fraction to the % by a single hyphen.

For 2% you would transmit 2-0/0

The ITU-R International Morse Code Recommendation M.1677-1 (10/2009) can be downloaded in Word or PDF format from

Other ITU-R M Series Recommendations are available at

0 comentários: